S.P. Kish Industries
Hybuild Floor Coating
SUBJECT:

FINISH:

COLORS:

SOLIDS BY WEIGHT:

SOLIDS BY VOLUME:

SPREADING RATE:

DRYING TIME:







POT LIFE:



SHELF LIFE:

MIXING
INSTRUCTIONS:

SURFACE PREPARATION:




APPLICATION:

CLEAN UP:



PAKAGING:


Hybuild Floor Coating

High gloss.

Color matching to customer specification.

95%

93%

260 sq. ft./gallon @ 6 mils dry film thickness.

Drying time is very much dependent on temperature. In normal conditions:

  • Dry to touch - 1 to 2 hours
  • Dry hard - 10 to 12 hours
  • Recoat time - 2 to 4 hours

3-5 hours. The higher the temperature the shorter the pot life.


Greater than 1 year.

Mix 1:1 by volume of two component. Mix thoroughly and let stand for 15-20 minutes.

Surface must be clean from oil, dust, grease, waxes and other foreign or loose materials that could prevent good adhesion. Acid etching, sandblasting or scarifying may be used if necessary.

Coating can be applied with roller.

Do not let the mixed coating get hard on equipment. Equipment can be cleaned with glycol ethers or ketones.

1's, 5's, or drums.

BACK TO FLOOR PRODUCTS

[Company Profile] [Industrial] [Agricultural] [Floor Coatings]
[Custom Formulas] [Environmental Info] [Contact Us]




Copyright 2000,  Small Logo  S.P. Kish Industries Inc., All rights reserved